EverFocus EPN Series User Manual page 36

5. Video Stream
Select the Video Stream (Stream 1 or Stream 2) that will be displayed in the live view window on
the right. Stream 2 is only selectable if you have enabled the stream (see 7.4.1 Multi Streaming).
The default setting is Stream 1 only.
6. View Size
Use this to select the appropriate view size and shape of the live view window on the right. A
smaller size might increase transmission speed and video quality.
7. Record
Click the Record button to start / stop recording the current video stream. By default, this icon is
only for one-minute video recording and the recordings will be saved at C:\EverFocus\. To change
the recording time, see File Size in 7.2 User Config. To change the location, see Export Folder in 7.2
User Config. To record long-period recordings, please set up a recording schedule, see 7.8.5
Schedule. To change the source video stream and recording format, see Video Recording Settings in
7.4.1 Multi Streaming.
Note: For Microsoft IE10 and above users, some settings have to be complete to enable this
function (see B. Snapshot/Record error message in 10. Troubleshooting).
8. Snapshot
Click the Snapshot button to take a snapshot. By default, the snapshot will be saved at
C:\EverFocus\. To change the location, see Export Folder in 7.2 User Config.
Note: For Microsoft IE10 and above users, some settings have to be complete to enable this
function (see B. Snapshot/Record error message in 10. Troubleshooting).
9. Play Audio / Transmit Audio
Click the Speaker and Microphone buttons to switch the sound on/off for the speakers and
microphones respectively (if such external devices have been connected to the camera directly or
via the network). To activate the Audio function, the Enable Audio must be selected (see 7.6 Audio).
Note that the camera provides a line-in/out 3.5mm jack (TRS), therefore, TRS speakers /
microphones with a (built-in) amplifier and external power supply are required.
30
EPN4220d/4220di