Table of Contents
Advertisement
2.
To access to the Live View window, double click the IP address of the desired device, the login
window pops up. Type the user ID and password to log in. By default, the user ID is user1 and the
password is 11111111.
3.
Click OK, the Live View window appears.
Note:
1. You might be required to download ActiveX for viewing the camera feed. If asked,
click Yes.
2. To enable Remote Live View, Firmware Upgrade and ActiveX Prompt on Internet
Explorer, some settings have to be complete. Please refer to 5.2 Settings for Microsoft
Internet Explorer in the User's Manual.
4.
To optionally configure the Machine Name, IP Address, IP Type or Port Number using the IPU:
a.
Log in the camera by checking the desired model and then click the Log in
Log in dialog box appears.
b.
Type the Username and Password. Click the OK button, the Login status displays.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be
able to log in several cameras at once.
23
EPN4220d/4220di
icon. The
Advertisement
Table of Contents
