What You Need To Know About Remote Management; The Www Screen - ZyXEL Communications VMG1312-T10C User Manual

Chapter 25 Remote Management
• Your Device can act as an SNMP agent, which allows a manager station to manage and monitor
the Device through the network. Use the SNMP screen (see
configure through which interfaces and from which IP addresses users can use SNMP to access
the Device.
• Use the DNS screen
which IP addresses users can send DNS queries to the Device.
• Use the ICMP screen
to pings and probes for services that you have not made available.
• Use the SSH screen
which IP addresses users can use SSH to manage the Device.

25.1.2 What You Need to Know About Remote Management

Remote Management Limitations
• Remote management does not work when:
• You have not enabled that service on the interface in the corresponding remote management
screen.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP Address field does not match the client IP address. If
it does not match, the Device will disconnect the session immediately.
• There is a firewall rule that blocks it.
Remote Management and NAT
When NAT is enabled:
• Use the Device's WAN IP address when configuring from the WAN.
• Use the Device's LAN IP address when configuring from the LAN.

25.2 The WWW Screen

Use this screen to specify how to connect to the Device from a web browser, such as Internet
Explorer.
206
(Section 25.6 on page 212) to configure through which interfaces and from
(Section 25.7 on page
(Section 25.8 on page 213) to configure through which interfaces and from
Section 25.5 on page
213) to set whether or not your Device will respond
209) to
VMG1312-T10C User's Guide