Table of Contents
Advertisement
25.5.1 Configuring SNMP
To change your Device's SNMP settings, click Maintenance > Remote MGMT > SNMP tab. The
screen appears as shown.
Figure 146 Maintenance > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 89 Maintenance > Remote MGMT > SNMP
LABEL
Server Port
Server Access
Secured Client IP
Address
Get Community
Set Community
Trap Community
VMG1312-T10C User's Guide
DESCRIPTION
This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
Select the interfaces through which a computer may access the Device using this service.
A secured client is a "trusted" computer that is allowed to access the SNMP agent on the
Device.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computers with an IP address in the range that you
specify to access the Device using this service.
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Chapter 25 Remote Management
211
Advertisement
Table of Contents
