Table of Contents
Advertisement
To switch the hob on
•
To switch the power on, touch and hold the on/off sensor (1)
approximately two seconds. The hob will beep and all five cooking
zone indicators will show '0'.
Please note: If a power level is not set within ten seconds, the hob
will switch off automatically.
After switching the mains supply on to the hob, or if the mains supply
is interrupted and then restored, the safety key lock may be activated.
The safety key lock LED will be on to indicate this. Simply press and
hold the safety key lock sensor (2) for approximately two seconds to
deactivate the satey key lock and proceed to use the hob as normal.
The safety key lock also activates after 60 seconds if the appliance
if switched off via the 'On/off sensor' (1). This is to help to prevent
accidental use. Simply follow the same step as above to deactivate
the safety key lock.
To set the power level
•
After switching the hob on, simply select the desired heat setting
using the '+' or '-' selectors for that zone. The power level ranges
from 1 (minimum) to 9 (maximum). The hob will then begin heating.
You can also press the '-' selector first to jump straight to power
level 9.
To turn the power off to a zone
•
To switch off a zone you can use the zone's '-' selector to return the
heat setting to 0 or alternatively you can press both the '+' and '-'
for
7
Advertisement
Table of Contents
