CDA HCN510 Manual For Installation, Use And Maintenance
  1. Manuals
  2. Brands
  3. CDA Manuals
  4. Hob
  5. HCN510
  6. Manual for installation, use and maintenance

CDA HCN510 Manual For Installation, Use And Maintenance

Hide thumbs Also See for HCN510:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual for Installation, Use and Maintenance
HCN510 Induction Hob
Manual for Installation, Use and Maintenance
Passionate about style
IMPORTANT: PLEASE REFER TO PAGE 13 FOR INFORMATION ON
CONFIGURING THE POWER CONSUMPTION MODE CORRECTLY. THE HOB
MUST BE CONFIGURED AT FIRST SWITCH ON.
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
1
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu

Advertisement

Table of Contents
loading

Related Manuals for CDA HCN510

Summary of Contents for CDA HCN510

  • Page 1 MUST BE CONFIGURED AT FIRST SWITCH ON. Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
  • Page 2 Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel. Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
  • Page 3 To avoid interference between your hob and a pacemaker, your pacemaker must be designed and programmed in compliance with the regulations that apply to it. As such, CDA guarantee only that our product is compliant. With regard to the compliance of the pacemaker or any potential incompatibility, you should obtain information from the manufacturer or your attending physician.

  • Page 4: Using Your Hob

    Using your Hob Zones: 1. Front left 1.8 kW 210 mm 2. Back left 1.2 kW 145 mm 3. Back right 1.8 kW 210 mm 4. Front right 1.2 kW 145 mm Control panel: 5. Power key 6. Timer keys 7.
  • Page 5 Using your Hob To switch the hob on To switch the power on, touch and hold the for approximately two seconds. The hob will beep and all four zone displays will show zero. Please note: If a power level is not set within ten seconds, the hob will switch off automatically. To set the power level There are power keys for each individual zone which allow you to set the power level by touching the keys for the zone...

  • Page 6: Child Lock

    Childlock The hob is equipped with a childlock to lock the controls. This can be used when the hob is off or during cooking. To switch on the childlock Touch the key for approximately two seconds until the LED above the childlock key illuminates and the hob beeps to confirm the childlock is switched on.

  • Page 7: Efficient Use Of Your Hob

    Efficient Use of your Hob The hob is equipped with zones of different sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate zone depending on the size of the pan. The most efficient use of the hob is shown below, where the pan and zone are correctly chosen.

  • Page 8: Cleaning

    3. Check that the fuse in the spur has not blown. 4. Check the hob is configured correctly (see page 13) In the event of a fault with the hob, please advise CDA Customer Care of any fault code shown on the display Contact CDA Customer Care A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...

  • Page 9: Troubleshooting

    IMPORTANT - PLEASE NOTE: In the event of any breakage, crack or cracking – even minimal – of the vitroceramic glass, im- mediately disconnect your appliance to prevent a risk of electric shock and contact CDA Customer Care.

  • Page 10: Fitting The Hob

    Fitting the Hob Unpacking the hob: Take care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 180mm away from any adjacent vertical surfaces, e.g.

  • Page 11: How To Install The Hob

    How to install the hob: Overall dimensions of the hob: Width: 580 mm Depth: 510 mm Worktop cut-out dimensions: Width: 560 mm Depth: 490 mm 1. Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker hood to ensure that you will have the required clearance.

  • Page 12: Power Configuration

    Power configuration This hob can be connected to a 13, 16, 25 or 32amp supply and configured to work on any of these power settings. If the hob is connected to a 32amp supply all four zones can be used on the maximum setting with boost at the same time. If however, the hob is connected and configured to a 13amp supply and all four zones are selected at the same time the hob will limit the maximum power consumed so that the 2.8kW power supply cannot be exceeded.

  • Page 13: Mains Electricity Connection

    Mains Electricity Connection Warning! this appliance must be earthed We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations. This hob is intended to be connected to permanent, fixing wiring and dependent on the power configuration is intended to be connected to a 13A supply or connected via a 13A plug.
  • Page 16 Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...

Table of Contents