E-Mail Direct Push; Setting Up An E-Mail Account; Composing And Sending An E-Mail And Sms Message - MiTAC Mio N169 Manual

E-mail Direct Push

Your device incorporates the Messaging & Security Feature Pack (MSFP).
When connected to the Exchange Server that supports Microsoft Exchange
2003 Service Pack 2 (or later), the device receives real-time notifications of
new e-mails via the Direct Push technology. New e-mails are automatically
downloaded to the device from the Exchange Server; you do not need to
check or download e-mails manually.
Before using the Direct Push feature, you need to set up a synchronization
relationship between the device and Exchange Server and complete the
initial synchronization. (See "Synchronizing Directly with the Exchange
Server" in section 6.1 for more information.)

Setting up an E-mail Account

You need to set up an e-mail account that you have with an Internet service
provider (ISP) or an account that you access using a VPN server connection
(typically a work account) before you can send and receive mail.
Messaging
1. Tap
New E-mail Account
2. Tap
3. Follow the on-screen instructions to complete the setup.

Composing and Sending an E-mail and SMS Message

Messaging
1. Tap
2. Tap the desired account on the account selection screen.
Menu
3. Tap the soft key
4. Enter the e-mail address or text message address of one or more
recipients, separating them with a semicolon. To access addresses and
phone numbers from Contacts, tap
Microsoft Pocket Outlook
.
on the account selection screen.
.
New
.
To
.
5-13