Camera; Introduction - MiTAC Mio N169 Manual

7

Camera

Your device features a built-in CMOS auto-focus camera. You can take
pictures or record video clips, and then directly view these pictures on the
device. What's more, you can immediately share with others your pictures
through the mobile phone network service.
7.1

Introduction

To switch to the program, press the Camera button on
the device, or tap
screen automatically turns to the landscape mode.
The program will enter the standby mode
automatically.
The program enters the standby mode after 2
minutes of inactivity in the preview mode. You
will see the "Press the camera button to activate
camera again" on-screen message. You can press
the Camera button to resume the program.
By default, the backlight is turned off after 30 seconds of inactivity in the
standby mode. (To change the setting, tap
Mio Settings Backlight
disappear. You can tap anywhere on the screen or press any button to
resume the backlight.
By default, the device enters the suspend mode after 1 minute in the
program standby mode with the backlight turned off. (To change the
setting, tap
Advanced
.) You can press the Power button to resume the program.
Camera
Programs Camera
. The
Advanced
.) The on-screen message will
Settings Personal
Settings Personal
Mio Settings Power
7-1