Taking Pictures - MiTAC Mio N169 Manual

7.2

Taking Pictures

1. By default, the camera is in the Camera and landscape mode.
2. Frame your target in the viewing window. You can rotate the device if
necessary.
Sets the file location and shows the
remaining capacity of that location.
Sets the resolution.
To adjust the image brightness, tap
+3.
To zoom in or out the image, tap
4x. (The actual zoom options depend on the image resolution. A
higher resolution allows less zoom options.)
3. To change the settings, tap
chapter.)
4. When you are ready, press the Camera button halfway to focus first, and
then press the Camera button fully to take the picture.
5. The picture (JPG format) will be saved automatically. If a storage card is
inserted, the file will be saved in the \Storage Card\My Pictures folder.
Otherwise, the file will be saved in the \My Device\My Documents\My
Pictures folder on the device.
7-2
Sets the camera mode.
Sets the flash mode.
Sets the ISO value.
. The adjustable range is –3 ~
. The options include 1x, 2x and
. (See "Camera Settings" later in this
Camera