Wireless Network Connection - MiTAC Mio N169 Manual

Wireless Network Connection

Your device has a built-in wireless network module. As long as you are in a
wireless LAN (WLAN) environment, you can connect to the network
without physical cables.
Turning On and Off the Wi-Fi Radio
By default, the Wi-Fi radio is turned off. To turn on the Wi-Fi radio, follow
this procedure:
1. Tap the Wireless Manager section on the Today screen.
Wi-Fi
2. Tap to change the Wi-Fi radio status from
3. To turn off the Wi-Fi radio, tap
Available Off
from to
Connecting to a Wireless Network
1. Turn on the Wi-Fi radio. (See "Turning
On and Off the Wi-Fi Radio" previously
in this chapter.)
2. By default, the device will automatically
detect the available wireless networks.
3. If more than one network is detected, the
screen will display a network list. Tap the
desired network and tap the
10-2
Wi-Fi
to change the Wi-Fi radio status
.
OK
soft key.
Off Available
to .
Getting Connected