MiTAC Mio N169 Manual page 121

Item Name
Timer
Effect
GPS Stamp
Continuous
Tap to access the second page:
Item Name
Storage Location
ISO
Shutter Sound
Flicker Control
Reset
Camera
Description
Sets the delay time of the timer. The options are
5s, 10s and Off (default).
Allows you to apply special effects on the
picture. The options are Normal (default), Sepia
and Mono.
When this function is enabled, you can add the
GPS positioning data into the picture you take.
(See the "Adding the GPS Stamp into the
Picture" section for information.)
Sets if you want to take continuous pictures. (See
the "Taking Continuous Pictures" section for
information.)
Description
Sets if you want to save the pictures on the
device or Micro SD card.
Sets how fast the camera reacts to light. A higher
ISO setting is recommended for use in low light
or for shooting fast action.
Sets the sound when the shutter button is
pressed.
Sets the flicker frequency to match that of the
fluorescent lamp.
Restores all camera settings to the default values.
7-5