Holding A Call To Take A Second Call; Rejecting The Second Call; Holding A Call To Make A Second Call; Swapping Between Calls - MiTAC Mio N169 Manual

Holding a Call to Take a Second Call

1. If there is another incoming call when you are talking on the device, a
pop-up window appears to notify you.
Answer
2. Tap the soft key to place the first call on hold, and answer the
second call.
3. To end the second call and go back to the first, tap
button.

Rejecting the Second Call

To reject the second call and keep your current call in progress, tap
Note not to press the End button; doing so will end the current call.

Holding a Call to Make a Second Call

1. During a call, tap
2. Dial a second number or the first few letters of the second contact's
name by using the numeric keypad on the device. Then press the Talk
button to connect. Wait for it to be picked up.
3. To end the second call and go back to the first, tap
button.

Swapping between Calls

When you have put a call on hold and made
or taken another call as described earlier, you
can swap between the two calls by tapping
Swap
.
Using the Phone
Hold
to place the first call on hold.
End
or press the End
Ignore
.
End
or press the End
3-9