Taking Continuous Pictures; Adding The Gps Stamp Into The Picture - MiTAC Mio N169 Manual

6. To view the saved picture, tap to enter the viewing mode. (See
section 7.4 for information.)
7. To exit the program, tap .

Taking Continuous Pictures

While in the Camera mode, you can switch to the Continuous mode to take 3
continuous pictures with a single press of the Camera button.
Tap . The icon indicates the Continuous
mode. Take pictures according to the instructions described in the "Taking
Pictures" section.
NOTE: The flash is turned off automatically in the Continuous mode.

Adding the GPS Stamp into the Picture

The program incorporates an additional GPS Stamp function. With this
function, the longitude and latitude information of the location where you
take a picture can be added into the meta data of the picture. You can then
use the optional navigation program to navigate to the location where the
picture was taken.
In Camera, tap . Now you are ready to use the
GPS Stamp function.
7-3
Camera