Recording Video Clips - MiTAC Mio N169 Manual

7.3

Recording Video Clips

1. By default, the camera is in the Camera mode. Tap
Video mode.
2. Frame your target in the viewing window. You can rotate the device if
necessary.
Sets the file location.
Sets the resolution.
3. To change the settings, tap
chapter.)
4. When you are ready, press the Camera button to start recording. To stop
recording, press the Camera button again.
7-6
Video mode
Remaining capacity of the
current file location
. (See "Video Settings" later in this
to switch to the
Camera