MiTAC Mio N169 Manual page 164

1. Make sure that the two devices are turned
on, visible, and within close range. (For
information on turning on the Bluetooth
function on the device, see "Turning On
and Off the Bluetooth Function"
previously in this chapter.)
Settings
2. Tap
Bluetooth Devices
3. Your device searches for other devices
with Bluetooth capabilities, and displays
them in the list.
4. Tap the name of the other device, and tap
Passcode
5. In , enter an alphanumeric passcode between 1 and 16
characters, and tap
6. Enter the same passcode on the other device.
7. To give the partnership a more meaningful name, change the name of the
Display Name
device in
Finish
8. Tap .
10-6
Connections
Add new device
.
Next
.
.
Next
.
Getting Connected