Expanding Your Device; Using A Micro Sd Card - MiTAC Mio N169 Manual

1.7

Expanding Your Device

Using a Micro SD Card

Your device has a Micro SD slot where you can insert an optional Micro SD
storage card, or SDIO wireless network card. With the removable memory,
you can store or backup your data and exchange data with other devices.
To use a Micro SD card:
1. Slide the back cover slightly, and then lift it off the device from the
bottom edge.
2. The Micro SD slot is on the bottom left corner. Insert the card into the
slot, with the connector pointing to the slot and its label facing outside.
3. To remove a card, first make sure that no application is accessing the
card. Then slightly push the top edge of the card to release it and pull it
out of the slot.
4. Replace the back cover.
NOTE:
A storage card is also called a memory card.
Make sure that no foreign objects enter the slot.
Before using a SDIO card, first install its supplied driver on the device and then
restart the device. Doing so ensures that the device can recognize the card
correctly.
Mio Technology does not guarantee the product's compatibilities with the Micro SD
cards from all manufacturers.
Getting Started
1-15