Table of Contents
Advertisement
6�7
Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1.
Press
MENU on the remote control and
select Install > Channel installation >
Digital: Test reception.
2.
Press
OK.
3.
Press the green key to automatically start
the test or manually enter the frequency of
the channel you want to test. If the signal
quality and strength is poor, reposition the
antenna or satellite dish and retest.
4.
When complete, press the yellow key to
store the frequency.
5.
Press the red key to return to the
Channel installation menu.
6.
Press
MENU to exit.
Note
D
If you have further problems with the
reception of your digital broadcast, contact
a specialised installer.
EN-28
Advertisement
Table of Contents
