Page 1
Register your product and get support at www.philips.com/welcome 19PFL3404H/12 22PFL3404H/12 26PFL3404H/12 32PFL3404H/12 42PFL3604H/12 19PFL3404D/12 22PFL3404D/12 26PFL3404D/12 32PFL3404D/12 42PFL3604D/12 19PFL3404D/05 22PFL3404D/05 26PFL3404D/05 User Manual...
Page 2
Appel local/Ortsgespräch/Chiamata locale Türkiye 0800 261 3302 Şehiriçi arama United Kingdom General No: 0870 900 9070 local General National Rate No: 0870 911 0036 Україна 8-800-500-69-70 Місцевий виклик This information is correct at the time of press. For updated information, see www.philips.com/support.
Back connector for 26 inch TV and larger 1 Notice Side connector Connect a computer Use a Conditional Access Module 2 Important Use Philips EasyLink Use a Kensington lock 3 TV overview Side controls and indicators 8 Product information Remote control...
Page 5
Philips to anticipate further developments in standardisation for early integration in its Manufactured under licence from Dolby products. Mains fuse (UK only) Laboratories. Dolby and the double-D symbol This TV is fitted with an approved are trademarks of Dolby Laboratories.
TV from the power the weight of the TV. Secure the wall outlet immediately. Contact Philips mount to a wall that can support the Consumer Care to have the TV combined weight of the TV and wall checked before use.
Page 7
the value printed on the back of the TV. Disposal of your old product and Never connect the TV to the power batteries outlet if the voltage is different. • Risk of injury, fire or power cord damage! Never place the TV or any objects on the power cord.
3 TV overview Remote control This section gives you an overview of commonly used TV controls and functions. Side controls and indicators POWER: Switches the product on or off. The product is not powered off completely unless it is physically unplugged.
Page 9
(Standby-On) SOUND(Smart Sound) • Switches the TV to standby if it is on. Launches the sound menu. • Switches on the TV if it is in standby. +/- (Volume +/-) MENU Increases or decreases volume. Toggles the main menu on or off. BACK P/P (Previous channel) c MHEG/TELETEXT •...
4 Use your Note product • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- or SOURCE at the side of the TV. This section helps you perform basic operations (see ‘Use more of your product’...
Watch connected devices • Press to mute the sound. • Press again to restore the sound. Note Use teletext • Switch on the device before selecting it as a source on the TV. Use the source button Press MHEG/TELETEXT. » The main index page appears.
5 Use more of Remove devices from the home menu your product If a device is no longer connected to the TV, remove it from the home menu. Access TV menus Press MENU Press to select a device to remove. Menus help you to install channels, change Press OPTIONS.
• [Personal]Lists customised personal • [Tint]Adjusts the colour balance in an picture settings. image. • [Vivid]Maximises picture settings. • [Custom tint]Make a customised tint • [Standard]Adjusts picture settings setting. (Only available if [Tint] > to suit most environments and types [Custom] is selected) of video.
Summary of picture formats [Unscaled]For HD and PC mode only, and in selected The following picture settings can be models only. Allows configured. maximum sharpness. Some distortion may Note be present due to the • Depending on the format of the picture broadcaster’s systems.
• [Delta volume]Levels out volume Smart sound Standard Picture differences between channels or Bass connected devices. Switch to the Sound Treble connected device before you change Volume the delta volume. Features Vol.vis.impaired Balance Installation English Audio language Use advanced teletext Software update Dual I Dual I-II...
Select teletext subpages Press to select [Show fav. ch.] and press OK. A teletext page can hold several subpages. » The favourite lists appear. Subpages are displayed on a bar next to the main page number. Press to select a favourite list and press OK.
Use the Electronic Press to select [Mark as favourite] Programme Guide and press OK. » The favourite lists appear. EPG is an on-screen guide available for digital Press to select a favourite list to add channels. EPG allows you to: the channel to.
Use the EPG options menu Press to set the sleep time. » The sleeptimer can be up to 180 Use the EPG options menu to set or clear minutes in steps of five minutes. If reminders, change day and access other useful set to zero minutes, the sleeptimer is EPG options.
Page 19
Set or change code Press to select [Lock] or [Unlock]. Press OK to confirm. Press MENU. » All channels and connected devices are Press to select [Setup] > locked or unlocked. [Features] > [Set code]. Press OK or to enter the code setup. Note Enter your code using the Numeric •...
Enter your code and press OK. Enter the three-digit page number of the subtitle page with the Numeric buttons. Repeat the process to unlock more channels. Press MHEG/TELETEXT to switch off teletext. Note Press SUBTITLE. » [Subtitle mode] menu appears. •...
[Installation] > [Clock] > [Auto clock]. Caution Press OK or to enter the [Auto clock] • Philips is not responsible if the USB storage menu. device is not supported nor is it responsible Press to select [Automatic] or for damage or loss of data from the device.
Turn on the TV. Press: • OK to pause the slide show. Connect the USB device to the USB port » icon appears. on the side of your TV. » The home menu appears. • Press to go back or move forward to the next image.
Music settings Update the TV software When listening to music, press OPTIONS Philips continuously tries to improve its to access one of the following music settings. products and we recommend that you update • [Start/Stop play] the TV software when updates are available.
• Select [Update now] to update the Access decoder channel software immediately. • Select [Remind me later] to exit the You can map channels provided through a update screen at that time and be decoder or descrambler to your TV channel reminded later.
Reset the TV to factory settings You can restore the default picture and sound settings of your TV. Channel installation settings remain the same. Press MENU. Press to select [Setup] > [Installation] > [Factory settings]. Press OK or to enter the [Factory settings] menu.
6 Install channels Language Menu language Picture Channel install. Channel assistant Sound Preferences Location Decoder Channel The first time you set up your TV, you are Features Clock Auto clock prompted to select a menu language and to install TV and digital radio channels (if available). Factory settings Action Installation...
System searching. Please wait. Digital channels found Language Channel assistant Picture Analogue channels found Channel install. Standby update Stop Sound Sound Preferences Preferences Start up message Analogue: Manual System Digital Test recept... Decoder Decoder Features Features When installation is complete, press OK Analogue: Manual Clock to return to [Installation] menu.
Step 3 Fine-tune analogue channels Reorder channels Press MENU. After you install channels, you can rearrange the Press to select [Setup] > order in which they appear. [Installation] > [Channel install.] > When watching TV, press OK to display [Analogue: Manual]. the channel grid .
a PC IN (VGA and AUDIO IN) 7 Connect devices Audio and video input from a computer. This section describes how to connect PC IN(AUDIO) various devices with different connectors and supplements examples provided in the Quick Start. Note • Different types of connectors may be used to connect a device to your TV, depending on availability and your needs.
c EXT 1 (CVBS and RGB) AUDIO Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. f SPDIF OUT Digital audio output to home theatres and other digital audio systems. SPDIF OUT d TV ANTENNA Signal input from an antenna, cable or satellite.
b EXT 3 (Y Pb Pr and AUDIO L/R) Back connector for 26 inch Analogue audio and video input from TV and larger analogue or digital devices such as DVD players or game consoles. SPDIF a HDMI 1 (HDMI and AUDIO IN) Digital audio and video input from high- definition digital devices such as Blu-ray c EXT 1 (RGB and CVBS)/EXT 2 (CVBS)
d TV ANTENNA a COMMON INTERFACE Signal input from an antenna, cable or Slot for a Conditional Access Module satellite. (CAM). TV ANTENNA b AUDIO L/R Audio input from analogue devices connected to VIDEO. e SPDIF OUT Digital audio output to home theatres and other digital audio systems.
e HDMI (Only for TVs 26 inches and • DVI-HDMI cable larger) For TV of size 19-22 inch Digital audio and video input from high- PC IN(AUDIO) For TV of size 26 inch and larger definition digital devices such as Blu-ray players. AUDIO IN : LEFT / RIGHT HDMI 1 / DVI...
COMMON INTERFACE at the side of the TV. Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. Press MENU. Push the CAM in as far as it will go. Press to select [Setup] >...
Use one-touch standby Press and hold Standby on the TV’s or device’s remote control for at least three seconds. » The TV and all connected HDMI devices switch to standby. Use a Kensington lock There is a Kensington security slot at the back of the TV.
576i - 50Hz • 576p - 50Hz • 720p - 50Hz, 60Hz To mount the TV, purchase a Philips TV mount • 1080i - 50Hz, 60Hz or a VESA-compatible TV mount. To prevent • 1080p - 24Hz, 25Hz, 30Hz, 50Hz, damage to cables and connectors, be sure to 60Hz.
Loudspeakers, unearthed audio devices, cable. If the blinking reoccurs, contact neon lights, high buildings and other large Philips Consumer Care. objects can influence reception quality. You forgot the code to unlock the TV lock If possible, try to improve the reception...
If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. If you cannot resolve your problem, refer to the FAQs for this product at www.philips. • Check that all cables are properly com/support.
10 Index display resolution EasyLink disable batteries enable bracket one-touch play one-touch standby environmental care Channel list favourite troubleshooting factory settings update favourite list channels select favourite list set up install automatic manual HDMI cable rename troubleshooting test reception child lock ratings lock clock install channels...
Page 40
music troubleshooting digital radio adjust volume menu screen care software One-touch play standby One-touch standby switch channels switch off switch on troubleshooting picture format tuner technical specifications picture format change wall mount troubleshooting TV lock Picture settings lock channels lock connected devices ratings reception Video format...