Automatically Install Channels - Philips 19HFL3340D/10 User Manual

6�1 Automatically install
channels
This section describes how to search and store
channels automatically. Instructions are for both
digital and analogue channels.
Installation
Languages
Country
Channel install...
Preferences
Source labels
Decoder
Current software info
Factory reset
Step 1 Select your menu language
1. Press MENU on the remote control and
select Install > Languages.
2. Press Æ to enter Menu language.
3. Press Î or ï to select your language.
4. Press OK to confirm.
5. Press Í to return to the Installation
menu.
In addition to menu language, you can
configure the following language settings via the
Languages menu (digital channels only):
• Preferred audio
one of the available audio languages as
your preferred audio language. For more
information, see Section 5.3 Adjust sound
settings.
•
Preferred subtitles language:
one of the available subtitle languages as
your preferred subtitle language. For more
information, see Section 5.8 Select a subtitle
language on digital TV channels.
• Hearing impaired: If available, select On
to display the hearing impaired subtitle with
your preferred language.
PHILIPS
Languages
Menu language
Preferred audio language
Preferred subtitle language
Hearing impaired
Audio description
Preferred audio format
language: Select
Select
• Audio description:
to hear the audio description with your
preferred language.
• Preferred audio format
format for the best sound reproduction:
- If you have connected a home theater
system, select Advanced.
- Otherwise, select Standard.
Note
D
Do not select Advanced unless you have
connected a home theatre system. If
you select Advanced, you must set other
options.
Step 2 Select your country
Select the country where you are located. The
TV installs and arranges channels according to
your country.
1. In the Installation menu, press ï to select
Country.
2. Press Æ to enter the list.
3. Press Î or to select your country.
4. Press Í to return to the Installation
menu.
Step 3 Install channels
Your TV searches and stores all available digital
and analogue TV channels as well as all available
digital radio channels.
1. In the Installation menu, press Î or ï
to select Channel install� > Automatic
installation.
2. Press Æ to select Start now.
3. Press OK.
4. Press the green key to start.
The installation may take a few minutes.
5. When the channel search is completed,
press the red key to return to the
Installation menu.
6. Press MENU to exit.
If available, select On
Select an audio
EN-25