Philips 19HFL3340D/10 User Manual page 47

When APPLICATION is Hotel/Hospital, the
limited Guest TV menu can be accessed by
guest as below:
Refer to consumer TV User Guide for the
description of each menu item.
When APPLICATION is BUSINESS MONITOR,
the normal consumer TV setup menu can be
accessed by using guest RC menu key with the
additional control features listed in the PBS
setup menu.
10�4�3 SWITCH ON SETTINGS
• SWITCH ON VOLUME
will always switch on (via mains-switch
or standby) to this preset value. The
On volume setting cannot exceed the
max volume. The current volume should
follow the on volume, and adjusting on
volume should also affect the current
volume.
EN-46
The letters are entered and navigated through
cursor keys and digit keys.
- The TV
• MAXIMUM VOLUME
maximum volume which the guest could
adjust to.
• SWITCH ON CHANNEL
of channel number (analog or digital)
or an external video source to go to
when the TV set is switched on from
mains power or standby. In case of LAST
STATUS setting, the set will switch to
the last channel or source before the
TV went to standby or mains power off.
This LAST STATUS setting takes priority
over the APPLICATION settings.
• POWER ON – Refers to power state
after mains power on. ON means the
set should turn On after mains power
on, while Standby means the set should
turn to standby. LAST STATUS means
that the set should switch to the last
power state before mains power off.
• DISPLAY MESSAGE
display of the welcome message for 30
secs after switching on the set from
mains power or standby. However,
if OSD Display is OFF, the welcome
message display is always disabled,
regardless of the Display Message
Setting.
• WELCOME MESSAGE
welcome message of 2 lines of 20
alphanumeric characters each. The
characters used depend on the language
selected for consumer operation.
– refers to the
– choice
– Enable the
– Define