Manually Install Channels - Philips 19HFL3340D/10 User Manual

Tip
E
When digital TV channels are found, the
list of installed channels may display empty
channel numbers. If you want to rename,
reorder or uninstall stored channels, see
Section 6.3 Rearrange channels.
6�2

Manually install channels

This section describes how to search and store
analogue TV channels manually. If you want to
search and store digital channel, please kindly
refer to Section 6.7. Test digital reception
Step 1 Select your system
Note
D
Skip to Step 2 Search and store new TV
channels if your system settings are correct.
1. Press MENU on the remote control
and select Install > Channel install� >
Analogue: Manual installation.
2. Press Æ to enter the Channel
installation menu, and System is
highlighted.
3. Press Æ to enter the System list.
Channel installation
Automatic installation
Installation update
Digital: Test reception
Analog: Manual installation
Rearrange
4. Press Î or ï to select your country or
region.
5. Press Í to return to the Channel
installation menu.
Step 2 Search and store new TV channels
1. Press MENU on the remote control and
select Install > Channel installation
> Analogue: Manual installation >
Search.
EN-26
PHILIPS
Analog: Manual installation
System
Search
Fine tune
Store current channel
Store as new channel
2. Press Æ to enter the Search menu.
3. Press the red key and the number keys on
the remote control to enter the three digit
frequency. Alternatively, press the green
key to automatically search for the next
channel.
4. Press Í when the new channel is found.
5. Select Store as new channel, and press
Æ to enter.
6. Press OK to save this channel.
The channel number will is shown on the
screen.
7. Press MENU to exit.
Fine tune analogue channels
You can manually fine tune analogue channels
when reception is poor.
1. Press MENU on the remote control and
select Install > Channel installation >
Analogue: manual installation > Fine
tune.
2. Press Æ to enter the Fine tune menu.
3. Press Î or ï to adjust the frequency.
4. Press Í when done.
5. Select Store current channel to store
the fine tuned channel under the current
channel number.
6. Press Æ to enter.
7. Press OK. Done appears.
8. Press MENU to exit.