Philips 19HFL3340D/10 User Manual page 48

10�4�4 CONTROL SETTINGS
• TELEVISION BUTTONS LOCKED
– Selection of television buttons locked
or unlocked. ON means all television
buttons are locked, except the Power
button, OFF means all television buttons
are enabled, while ALL means all
television buttons are locked, including
the Power button.
• REMOTE CONTROL LOCKED
Enable or disable the operation of the
normal remotes. However, when the
High Security Mode is OFF, to enter
PBS Mode Menu, using the "319753["
key sequence is not blocked, even when
Remote Control Locked is ON.
• OSD DISPLAY
OSD display (e.g., channel number or
name, sound mode, volume bar, clock,
etc.).
• HIGH SECURITY MODE
between using normal consumer RC
or PBS setup RC to display the setup
menu. When enabled, only the setup RC
menu key can display the setup menu.
When disabled, both the setup RC menu
key and normal guest remote control
sequence "319753 [" can display the
setup menu.
• AUTO SCART
disable (OFF) autoscart switching or
break-in in PBS mode.
–
– Enable or disable
– choice
– Enable (ON) or
• LOW POWER STANDBY -
the power mode when TV set goes to
standby by pressing RC power key or
Local Keyboard power key - Green: TV
will enter low standby power mode to
achieve minimum power consumption;
Fast: TV will enter semi-standby mode to
achieve fast powering up,
10�4�5 BLANK CHANNEL
• BLANK CHANNEL - choice of either
blank or not blanking the video for the current
channel. In PBS application, the blanked channel
is used for off-air radio transmission, e.g., re-
modulated FM radio, music CDs etc. The current
blank mode should follow the channel blanked
status and changing the channel blanked should
also blank or unblank the current channel.
Note
D
Channel Blank will apply for the current
channel, to navigate and blank other
channels, Blank channel submenu should be
selected by clicking on right cursor key as
below:
define
EN-47