10�4�6
SMARTLOADER TO TV
(using USB)
Copy TV configuration data (Video, Audio,
Channel Table, PBS Mode settings) from USB
Memory stick to TV. Upon copying progress
completion, an indication message will feedback
to PBS-user ("Settings copied to TV").
Note
D
During copying process, the USB memory
stick should not be removed to prevent any
undersigned functionality of the TV.
Note
D
During this process, the cloning files NVM_
MTK_2K8_EU.BIN and CH_MTK_2K8_
EU.BIN are retrieved by TV and update the
TV NVM and Channel setup accordingly.
Note
D
All RC command and local keyboard will be
disabled during copying process
Note
D
It is recommended to do a television switch
off/switch on after the cloning is done.
EN-48
10�4�7
TV TO SMARTLOADER
(using USB)
Copy TV configuration data ( Video, Audio,
Channel Table, PBS Mode settings[i.e.Welcome
Message, ...]) from TV to USB drive.
• Upon copying progress completion, an
indication will given as feedback to PBS-user
("Settings copied to USB")
A 128MB USB Memory Stick with at least
10MB free memory space will be suitable�
Note
D
During copying process, USB drive should
not be removed to prevent any undersigned
functionality of the TV.
Note
D
After completed, there are 2 files generated
i n t h e U S B ro o t d i re c t o r y - N V M _
MTK_2K8_EU.BIN containing the general
setting for example, Video/Audio, etc. and
CH_MTK_2K8_EU.BIN containing the
channel installation setting for example
channel list, etc.
Note
D
All RC command and local keyboard will be
disabled during copying process
Note
D
Normally, the first TV is manually configured/
setup by the hotel installer, then all the
data are transferred/ cloned to USB drive
through TV to Smart Loader, subsequently,
others TVs can be updated by using same
USB drive. This cloning feature prevent multi
manually setup on all the TV sets, hence,
speed up the hotel installation process.