6�3
Rearrange channels
1.
Press
MENU on the remote control and
select Install > Channel installation >
Rearrange.
2.
Press
Æ to enter the Rearrange list.
3.
Press
Î or ï to select the channel you
want to rearrange.
4.
Press the yellow key to move the channel
up the list, or press the blue key to move
the channel down the list.
5.
Press
MENU to exit.
6�4
Rename channels
1.
Press
MENU on the remote control and
select Install > Channel installation >
Rearrange.
2.
Press
Æ to enter the Rearrange list.
3.
Press
Î or ï in the Rearrange list to
select the channel you want to rename.
4.
Press the red key.
5.
Press
Í and Æ to select characters or Î
and ï to change the characters. Space,
numbers (0-9) and other special characters
are located between z and A.
6.
Press the green key or
Tip
E
Delete all characters by pressing the yellow
key. Delete only the highlighted character by
pressing the blue key.
OK to finish.
6�5
Uninstall or reinstall
channels
You can uninstall a stored channel or reinstall
an uninstalled channel.
1.
Press
MENU on the remote control and
select Install > Channel installation >
Rearrange.
2.
Press
Æ to enter the Rearrange list.
3.
Press
Î or ï to select the channel you
want to uninstall or reinstall.
4.
Press the green key to uninstall or reinstall
the channel.
5.
Press
MENU to exit.
6�6
Manually update the channel
list
You can manually update the channel list.
1.
Press
MENU on the remote control and
select Install > Channel installation >
Installation update.
2.
Press
Æ to enter the Installation update
menu. Start now is highlighted.
3.
Press
OK.
4.
Press the green key to start the update.
This may take a few minutes.
5.
When the update is complete, press
the red key to return to the Channel
installation menu.
6.
Press
MENU to exit.
EN-27