Table of Contents
Advertisement
10�3
INITIAL SETUP
10�3�1
Virgin mode – Out Of Box
Setting and Initial Setup
This TV set includes an installation feature that,
at initial set-up of the TV, guides you through the
installer menu to apply the proper installation
settings.
This feature, named Virgin Mode, active when
the TV set is unpacked and first powered on,
is normally used for installation/setting of first
TV set. To save time during a complete setup
for hospitality system with more televisions, the
settings of this first TV set can be duplicated to
other televisions using the cloning mechanism
(described in chapters 4.6 and 4.7).
Please select your language
Press OK or the green color key on your remote
control to confirm
setting PBS Mode to ON, and not
Before
D
using cloning as configuration mechanism,
the television must be configured.
Note
D
In case of cloning the TV settings, Virgin
mode can be skipped by pressing the "Menu"
button on the television twice.
Follow the Virgin Mode guiding to set all
channels/programs
Digital Channels start at Program Number 1,
Analogue Channels start at Program Number
900.
EN-44
Note
D
The channel list can be customized by
hotel installer through Rearrange channel
list feature as indicated below.
Also rearrange channels can be easily done
through using Rename Channels feature
by entering direct channel numbers and
channel name if needed.
After setup/installation is completed, subsequent
switching on the TV will not let this Virgin Mode
menu to pop up again.
For details refer to consumer TV User Guide.
Preferred customer picture, sound and feature
settings - these settings will be used whenever
the TV is switched on from mains or standby in
PBS Mode
This can be achieved by popping up consumer
TV setup menu as below and do Picture/sound
setup and channel installation etc accordingly:
Apart from manually adjusting picture settings,
you can use Smart settings to set your TV to a
predefined picture and sound setting.
Advertisement
Table of Contents
