Manually Install Channels; Rename Channels - Philips 47PFL4606H User Manual

Manually install channels

This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
‡
Skip this step if your system settings are
correct.
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > [System],
then press OK.
3
Select the correct system for your
country or region, then press OK.
Step 2 Search and store new TV
channels
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > *[Find
channel], then press OK.
‡ If you know the three-digit frequency
of the channel, enter it.
‡ To search, select [Search], then press
OK.
3
When the channel is found, select
[Done], then press OK.
‡ To store the channel as a new
number, select [Store as new
channel], then press OK.
‡ To store the channel as the
previously selected channel, select
[Store current channel], then press
OK.
32 EN
Step 3 Fine-tune analogue channels
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
manual install] > [Fine-tune], then press
OK.
3
Press WR ÀQHWXQH WKH FKDQQHO

Rename channels

You can rename channels. The name appears
when you select the channel.
1
While you watch TV, press
» The channel matrix menu is displayed.
2
Select the channel to rename.
3
Press OPTIONS.
» The channel options menu appears.
4
Select [Rename channel], then press OK.
» A text input box appears.
5
Press to select each character,
then press OK.
6
When the name is complete, select
[Done], then press OK.
Tip
‡
Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
FIND.