Install Channels; Automatically Install Channels - Philips 47PFL4606H User Manual

6 Install channels

7KH ÀUVW WLPH \RX VHW XS \RXU 79 \RX DUH
prompted to select a menu language and to
install TV and digital radio channels (if available).
$IWHUZDUGV \RX FDQ UHLQVWDOO DQG ÀQH WXQH
channels.

Automatically install channels

You can search and store channels automatically.
Step 1 Select your menu language
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
3
Select a language, then press OK.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1
Press .
2
Select [Setup] > [Search for channels],
then press OK.
3
Select [Reinstall channels], then press
OK.
» The country menu appears.
4
Select your country, then press OK.
» The channel installation guide begins.
5
Select [Start], then press OK.
» All available channels are stored.
6
To exit, press OK.
Update the channel list
You can enable automatic update of channels
when your TV is in standby mode. The
channels stored in your TV are updated every
morning according to the channel information
in the broadcast.
1
Press .
2
Select [Setup] > [Channel settings] >
[Channel installation] > [Automatic
channel update].
3
Select [On] to enable the automatic
update or select [Off] to disable it.
4
To return, press .
EN 31