Vulcan-Hart GRS25 Service Manual page 51

15. Grasp tank from the back at the top of the flue wrap area and lift the entire tank assembly out of the fryer body.
Note that on D and C models the heat shield insulation may catch on the body frame. If this occurs the tank
assembly will not lift out of the unit. Set the tank back into the fryer body and try to align the heat shield to
keep the insulation from catching. (Fig. 77)
With tank now out side of the fryer body position the tank onto its back so that the component parts may be
removed for reassembly onto the new tank.
16. With a 1/2" socket loosen the bolts holding the burners and insulation box in place. (Fig. 78)
Fig. 77
Fig. 78
51