Vulcan-Hart GRS25 Service Manual page 47

3. If a fryer battery is involved, with a utility knife split the silicon sealant from around the grease strip between
the tanks and remove the stainless grease strip, then split the tank sections apart with a utility knife
(Fig. 69)
4. Follow steps 1-4 under Removal of KX Thermostat (Millivolts) or 1-2 under Removal of Control Panel
(Electronic Ignition) as required for type fryer to be serviced. If fryer is using KX thermostat, secure the KX
thermostat body between the fryer burners so that it will not fall when the tank assembly is lifted from
the fryer. (Fig. 70)
Fig. 69
Fig. 70
47