Skoda FABIA II 2007 Workshop Manual page 114

– Position the digital depth gauge twice at opposite-facing points
for a precise measurement.
In this way, an even more precise value is determined as the in‐
accuracy resulting from the "wobbling" on the engaging bearing
is thus minimised.
– Note the mean value of both measurements to the gauge block
-T10374 - .
– Note this value and name it "A2".
As an example:
Dimension "A2" = 2,50+2,542 = 2.52
As an example: "A2" = 2.52 mm
The following calculation:
"A2" minus "B" plus height of the gauge block -T10374- = depth
of the engaging bearing of clutch 2.
The height of the gauge block -T10374- is always the same. On
the inside, it is: 36.20 mm.
Example calculation:
2.52 mm minus 2.96 mm plus 36.20 mm = 35.76 mm.
You have now determined the value of how deep the engaging
bearing is actually positioned in the gearbox.
The depth of the bearing must be 34.35 mm on each gearbox.
The nominal dimension "34.35 mm" is deducted from the actual
dimension. Thus, the actual air passage of clutch 2 is determined.
– Continue the calculation:
The determined value (in the example: 35.76 mm) minus the
nominal value = the air passage of the clutch.
Example calculation:
35.76 mm minus "34.35 mm" = air passage of clutch 2 = 1.41 mm.
Now the tolerances in the double clutch must be included in this
calculation. This is a very simple procedure:
FABIA II 2011 ➤
Automatic gearbox 0AM - Edition 02.10
1. Removing and installing the double clutch
23