Table of Contents
Advertisement
Step 13: System Controller Setup
Figure 6.
Assign lighting member types
After creating an area for only lighting members:
1. Click the Configuration tab.
2. Set Unoccupied Heating and Cooling to Disable.
Figure 7.
Unoccupied operations
Important: This will prevent the area from turning on the lights during unoccupied
heating and cooling.
When an area has only lighting members, the Tracer Display main screen shows a light
bulb and override button. No up/down arrows are shown. See the "Parking Lot Lights"
example in
Figure
8.
Figure 8.
Lighting only area
Lighting Controlled With HVAC
When lighting is to be controlled with HVAC, include lighting BOPs as Lighting member
types with the RTU in the area. When an area has a lighting member, a light bulb icon
appears on the Tracer Display main screen for that area. See the "Office" example in
Figure
9.
12
BAS-SVN208G-EN
Advertisement
Table of Contents
