Print Line Item Name Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.15

Print Line Item Name Programming

Print Line Item Names not listed in Section 6.14 Financial Report Item Name Programming can be
programmed here.
CONDITION
OPERATION
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress the [↓] key six times then
Select a print item name of which name
is to be programmed with the [↑] or [↓]
Input a print line item name.
NOTES:
1. The maximum number of characters programmable for each item are shown in the table on the following
pages. Please note that some items require their name entries as one set. The maximum number of
characters in the table shows the capacity in one-byte characters. A two-byte character occupies two one-
byte characters' space. (Also refer to CHARACTER ENTRIES at the beginning of this chapter.)
2. As shown in the table on the following pages, the standard program data are preprogrammed which is auto-
set after a RAM Clear). Therefore, program only the items that need to be changed.
Anytime outside a sale
Mode Lock: SET
Main Menu
or
Depress [2].
[Enter] key.
or
Depress [7].
key.
[Enter]
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" is selected.
"7 PRINT ITEM NAME" is selected.
The print line item name already programmed is displayed.
The ECR enters character input mode.
NOTE 1 below
The print line item name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
6-77
6.15 Print Line Item Name Programming
A long receipt is issued and the
EO3-11106