Toshiba MA-600 Programming Manual page 77

6. TERMINAL FILE PROGRAMMING
3) Example:
To program the following Store Message.
T
1 3 4 3
Operation
When the ECR is being outside a sale
and in SET mode, depress the [1] or
[Enter] key.
Depress the [↓] key twice.
Depress the [3] or [Enter] key.
The message already programmed is
displayed.
The [Enter] key depression allows the
ECR to enter the 1st line message
input mode. (The [C] key depression
clears the message already
programmed.) The 1st line message is
input.
The [Enter] key depression results in
that the input message is entered and
displayed.
The [Enter] key depression allows the
ECR to enter the 2nd line message
input mode. (The [C] key depression
clears the message already
programmed.) The 2nd line message
is input.
E C S T
P E A C H
P H O N E : 8 7 - 6 4 3 7
Number of programmed characters
(continued on the next page)
O R E
D R I V E
LCD Display
Number of programmable characters
6-57
6.8 Store Name Message Programming
Line No. 1
Line No. 2
Line No. 3
Line No. 4
Remarks
The cursor is moved on to "3 STORE
MESSAGE".
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
To program a message in a desired line,
move the cursor there with the [↓] key then
depress the [Enter] key.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
When the [Enter] key is depressed, the
message programmed in the 1st line is
printed.
Example of key operation)
[→] [→] [→] [→] [→] [→][→] [Dbl] [T] [E]
[C] [→] [S] [T] [O] [R] [E] [Enter]
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
EO3-11106