Toshiba MA-600 Programming Manual page 108

6. TERMINAL FILE PROGRAMMING
3) Example
To program "CALL MANAGER" instead of standard program data "MANAGER REQUIRED" for Error Code 3.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key eight times.
Depress the [9] or [Enter] key.
Depress the [↓] key twice, then
depress the [Enter] key.
(Error Code 3 ("MANAGER
REQUIRED") is selected.)
The [C] key depression clears the error
item name already programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
LCD Display
(continued on the next page)
6-88
6.17 Error Item Name Programming
Remarks
The cursor is moved on to "2 NAMES".
"2 NAMES" is selected.
The cursor is moved on to
"9 ERROR ITEM NAME".
"9 ERROR ITEM NAME" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The error item name already programmed is
displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[C] [A] [L] [L] [→] [M] [A] [N] [A] [G] [E] [R]
[Enter]
When the [Enter] key is depressed, the
programmed data is printed.
EO3-11106