Toshiba MA-600 Programming Manual page 114

6. TERMINAL FILE PROGRAMMING
3) Example
To program "X_DP_PROFIT" instead of standard program data "X_PROFIT" for Report No. 21.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key nine times.
Depress the [0] or [Enter] key.
Depress the [↓] key twenty times, then
depress the [Enter] key.
(Report No. 21 ("X_PROFIT") is
selected.)
The [C] key depression clears the
report name already programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
LCD Display
(continued on the next page)
6-94
6.18 Read/Reset Report Name Programming
Remarks
The cursor is moved on to "2 NAMES".
"2 NAMES" is selected.
The cursor is moved on to
"0 X/Z REPORT NAME".
" 0 X/Z REPORT NAME" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The report name already programmed is
displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[X] 515 [#] [D] [P] 515 [#] [P] [R] [O] [F] [I]
[T] [Enter]
When the [Enter] key is depressed, the
programmed data is printed.
EO3-11106