Salesperson Name Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.13

Salesperson Name Programming

By programming Salesperson here, the name of each salesperson can be programmed in a maximum of 12
characters.
CONDITION Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress the [↓] key four times then
Select a salesperson of which name is
to be programmed with the [↑] or [↓]
Input a salesperson name.
NOTES:
1. A maximum of 30 salesperson names can be set. The salesperson codes 1 to 30 are fixed.
2. A maximum of 12 one-byte characters or 6 two-byte characters can be entered. A combination of both types
is also available.
Main Menu
or
Depress [2].
[Enter] key.
or
Depress [5].
key.
[Enter]
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" is selected.
"5 SALESPERSON NAME" is selected.
The salesperson name already programmed is displayed.
The ECR enters character input mode.
A maximum of 12 one-byte or 6 two-byte characters are input.
The salesperson name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
6-68
EO3-11106
6.13 Salesperson Name Programming
A long receipt is issued and the