Toshiba MA-600 Programming Manual page 184

6. TERMINAL FILE PROGRAMMING
Example of Denmark rounding
For the Denmark rounding, the amount total is rounded as shown below.
Pre-rounded value of the
two least effective digits
0 to 12
13 to 37
37 to 62
63 to 87
88 to 112
3) Example
To set the Denmark rounding.
Pre-rounded value of the
two least effective digits
0 to 12
13 to 37
37 to 62
63 to 87
88 to 112
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
five times.
Depress the [6] or [Enter] key.
Depress the [↓] key six times.
Depress the [7] or [Enter] key.
Input 1200, then depress the [Enter]
key.
Post-rounded value
00
25
50
75
100
Post-rounded value
00
25
50
75
100
LCD Display
(continued on the next page)
6-164
6.40 Special Rounding Process Setting, 2-digit type
Ignore in setting
Remarks
The cursor is moved on to "6 OTHER".
"6 OTHER" is selected.
The cursor is moved on to "7 ROUND TBL 2
DIGITS".
"7 ROUND TBL 2 DIGITS" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
EO3-11106