Toshiba MA-600 Programming Manual page 39

6. TERMINAL FILE PROGRAMMING
Setting Example)
To set Address No. 1 with the following requirements:
(Refer to the Address No. 1 table on the subsequent page.)
Bit No. 1: Time NON-PRINT (SET status)
Bit No. 3: Subtotal NON-PRINT (SET status)
Other bits will be selected to "RESET" status.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
five times.
Depress the [6] or [Enter] key.
Depress the [↓] key.
Depress the [2] or [Enter] key.
Address No. list is displayed. Select a
desired Address No. with the [↑] or [↓]
key.
In this example, Address No. 1
(01NON-PRINT) is selected.
With the [Enter] key depression,
Address No. 1 setting is displayed.
LCD Display
(continued on the next page)
6-19
6.5 System Option Programming
Remarks
The cursor is moved on to "6 OTHER".
The cursor is moved on to "2 SYSTEM
OPTION".
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
For the selected Address No., the Bit
Numbers currently programmed are
displayed on the 7-segment Numeric display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
EO3-11106