System Option Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.5

System Option Programming

This operation is used to set the ECR's basic features and selective functions to meet the requirement of the
market and your user.
This programming operation is performed in SET mode or BLIND mode.
In SET mode, you can select a desired menu item on the LCD display. Address No. 1 to Address No. 29 are
programmable. In BLIND mode, you can directly enter a desired Address No. on the keyboard. All system
options from Address No. 1 to Address No. 49 are programmable.
CONDITION
After Financial Daily Reset
OPERATION
For Dealer System Options:
(Address No. 1 to No. 29)
For Dealer System Options:
(Address No. 1 to No. 49)
Programming in SET mode
Depress [↓] five times then [Enter].
Depress [↓] then [Enter].
Select a desired Address No.
Move the cursor on to a desired bit No.
Choose bit status with the [←] or [→]
Main Menu
or
Depress [6].
or
Depress [2].
with the [↑] or [↓] key.
[Enter]
with the [↓] key.
key.
[Enter]
[End]
Mode Lock: SET
Mode Lock: BLIND
ECR is being outside a sale and in SET mode.
"6 OTHER" is selected.
"2 SYSTEM OPTION" is selected.
(Selectable from Address No. 1 to Address No.29.)
The Bit Numbers currently programmed are displayed on the 7-
segment Numeric display.
Every time the [←] or [→] key is depressed, N and Y are displayed
alternately. N and Y indicate RESET and SET statuses,
respectively.
The selected Address No. setting is entered.
The Bit Numbers with SET status are displayed on the 7-segment
Numeric display.
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
6-18
EO3-11106
6.5 System Option Programming