Foreign Currency Exchange Rate Setting - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.28

Foreign Currency Exchange Rate Setting

The rate of each foreign currency (corresponding to the [CUR1] to [CUR5] keys) are set in this operation.
By setting a rate on each Foreign Currency Key, reading the sale total and tendering in the foreign currency value
will be possible for sale finalization.
Any time outside a sale
CONDITION
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] three times then [Enter].
Depress [↓] twice then [Enter].
Input the rate of [CUR1] key, then
Input the rate of [CUR2] key, then
Input the rate of [CUR3] key, then
Input the rate of [CUR4] key, then
Input the rate of [CUR5] key, then
NOTE: When inputting 0, the rate of the foreign currency will be cancelled. If doing so, the rate of the foreign
currency should be set in the registration operation.
Main Menu
or
Depress [4].
or
Depress [3].
depress [Enter].
depress [Enter].
depress [Enter].
depress [Enter].
depress [Enter].
[End]
ECR is being outside a sale and in SET mode
"4 RATE, LIMIT AMOUNT" is selected.
"3 CUR EXCHANGE RATE" is selected.
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
6-132
6.28 Foreign Currency Exchange Rate Setting
EO3-11106