Toshiba MA-600 Programming Manual page 153

6. TERMINAL FILE PROGRAMMING
Foreign Currency Exchange Rate Calculation
1. The rate must be calculated in the subsidiary currency unit values for both the domestic and the foreign
currencies. (In case of calculating the rate from the domestic to a foreign currency with the same zero-
suppress form, such as from Euro to U.S. $, it will be no problem even if it is calculated in the main currency
of Euro and $. However, in case of exchanging from a domestic currency such as Euro or $ to Japanese
yen, or vice versa, this rule must be obeyed; otherwise a wrong rate will result.)
2. Calculate the required foreign currency value equivalent to the domestic currency value "1". Then the
obtained value is the Exchange Rate value to be entered in the setting operation stated on the previous
page.
3) Example
To set two foreign currency rates:
(The rates here are merely examples, and may be different from the actual rates currently in effect.)
(DOMESTIC)
EURO
€1,00
1 EURO Cent
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
three times.
Depress the [4] or [Enter] key.
Depress the [↓] key twice.
Depress the [3] or [Enter] key.
Conditions given for Domestic Currency and Foreign Currencies
(continued on the next page)
(CUR1)
U.S. Dollar
$1,20
1.20 Cent
LCD Display
6-133
6.28 Foreign Currency Exchange Rate Setting
(CUR2)
Japanese Yen
¥137,74
1,3774 yen
Remarks
The cursor is moved on to "4 RATE, LIMIT
AMOUNT".
"4 RATE, LIMIT AMOUNT" is selected.
The cursor is moved on to "3 CUR
EXCHANGE RATE".
"3 CUR EXCHANGE RATE" is selected.
EO3-11106