Toshiba MA-600 Programming Manual page 84

6. TERMINAL FILE PROGRAMMING
NOTES:
1. Cashiers 1 to 8 are programmed with the names "1CL" to "8CL" as default setting.
2. For the name of each cashier, a maximum of 12 one-byte or 6 two-byte characters can be entered.
A combination of both types is also available.
3. Training entry status is available for every cashier.
4. Prior to the change of cashier status (Normal cashier
Cashier), daily reports and GT reports of this cashier should be taken.
3) Example
To program the following cashier data.
Cashier 1: JONES (cashier name), Training Cashier (status)
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key twice.
Depress the [3] or [Enter] key.
The cashier name already
programmed is displayed.
The [Enter] key depression allows the
ECR to enter Cashier 1 programming
mode menu.
(To program a desired cashier, select
the cashier with the [↓] key then
depress the [Enter] key.)
→
Training cashier, or Training cashier
LCD Display
(continued on the next page)
6-64
6.11 Cashier Name and Status Programming
→
Normal
Remarks
The cursor is moved on to "2 NAMES".
"2 NAMES" is selected.
The cursor is moved on to "3 CASHIER
NAME".
"3 CASHIER NAME" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
EO3-11106