Comms Screen - York YD Mod D Operation Manual

Comms screen

Figure 39: Comms screen
This screen allows definition of the necessary communications parameters. See
of the Printer connections and setup. Presently, there are no COM 2 communications features
available.
Table 92: Display only fields
Field/LED name
COM 2 and COM 6 communication
parameters
Table 93: Programmable
Button
Chiller ID
Printer setup
Printer baud rate
Printer data bits
Printer parity bits
Printer stop bits
Table 94: Navigation
Button Access level
Home View
Setup View
102
Description
The microboard will automatically change communication parameters until it finds the
correct settings to communicate with the starter logic boards. The starter type must
be entered correctly on the Setup Screen.
Description
Access level required: Operator
This ID number is printed at the top of reports obtained with a local printer.
Access level required: Operator
Pressing this key places a green selection box around the first changeable parameter.
Use the ▲ and ▼ keys to place the selection box around the desired parameter to be
changed. With the selection box around the desired parameter, press the Enter key. A
dialog box is displayed permitting data entry.
Define the baud rate at which the panel shall communicate to the printer.
Defines the number of data bits with which the panel shall communicate to the
printer.
Define the number of parity bits with which the panel shall communicate to the
printer.
Define the number of stop bits with which the panel shall communicate to the printer.
Description
Returns to the Home screen.
Returns to the Setup screen.
Printers
Model YD Mod D with OptiView Control Center
for details