Kawai ANYTIME X2 GP Service Manual page 52

〔6〕 PARTS LIST & ASSEMBLING INSTRUCTIONS
【L】 Speaker
【L-2】 Installing the Speaker Backboard and the Support Fittings
Assembling Instruction
1. Attach acoustic material ③ on speaker backboard ② with eight tackers ⑧ .
＊ Observe the attaching position shown in the drawing below.
2. Connect the speaker cabe to the speaker terminal.
＊ Follow the wiring instruction shown in the drawing on the right.
3. Attach speaker backboard ② and enclosure supports (L) (R) ④ ⑤ on
enclosure ① with four screws ⑥ .
＊ Insert the cable into the cut of the speaker backboard ② (indicated in circle)
to stabilize it.
4. Fasten speaker backboard ② on enclosure ① with two screws ⑦ .
Acoustic material, Tacker and Positions
All manuals and user guides at all-guides.com
Notching
– 52 –
Wiring the Speaker
【Speaker (L) Assy】
【Speaker (R) Assy】
No. Description Description
1 Enclosure Assy Enclosure assy
2 Speaker Back Board Speaker backboard
3 Acoustic Material Acoustic material
4 Enclosure Support (L) Enclosure support (L)
5 Enclosure Support (R) Enclosure support (R)
6 + TRUSS MACHINE SCREW + Truss machine screw
+ TRUSS SELF TAPPING + Truss self tapping screw
7
SCREW TYPE A type A
8 Tacker Tacker
Speaker terminal (Unmarked ) (Red)
↑ ↑
Speaker terminal (Black) (White)
Speaker relay biaxial cable (L)
KPBB-0806
Speaker termina (Unmarked ) (Red)
↑ ↑
Speaker terminal (Black) (Red)
Speaker relay biaxial cable (R)
KPBB-0807
Remarks PN
See L-1
918504
10 x 150 x 300 816620
918539
918521
M4 x 16 797243
4 x 12 797985
W10 x L6 798010