Ｃ】 Checking The Lcd - Kawai ANYTIME X2 GP Service Manual

② Press down each pedal, and check if the following message appears on the LCD for each pedal.
Soft
Damper
XXX : Check if the value varies from 0 to 127 depending on how deeply the damper pedal is
being depressed.
If the LCD display doesn't show the above, the sensing system of pedals need to be adjusted.
③ Adjust the switch position according to 【D】 " Adjusting the Pedal Sensor" .
※ If the messages do not appear on the LCD even after adjusting all the Soft, Sostenuto and Damper
switches, check cable and connector of each switch.
【C】 Checking the LCD
Starting from the Check mode of the switch
press [1] and [3] buttons simultaneously.
When the message above appears, press the [EFFECTS] or [REVERB] button.
・ Press [EFFECTS] button, and make sure if all the dots turn off .
・ Press [REVERB], and make sure if all the dots turn on.
If dots are missing when the [REVERB] button is pressed, the LCD is faulty.
All manuals and user guides at all-guides.com
Sostenuto
– 15 –