Kawai ANYTIME X2 GP Service Manual page 49

〔6〕 PARTS LIST & ASSEMBLING INSTRUCTIONS
【J】 Action
【J-4】 Installing the Sensor Arm and the Sensor
Detail F
＊ Hammer shank assy, wippen assy, keyboard, etc. are omitted in the drawing.
All manuals and user guides at all-guides.com
Screw⑤ + Washer⑥
Detail F
Screw for
adjusting height
Stop rail bracket axis
Assembling Instruction
1. Insert screws ⑤ to the two end points of sensor (1) assy ③ (from the top), then press
fit nylon washers ⑥ from the bottom to prevent screws ⑤ from dropping.
＊ Refer to "Position of screw and washer" in the drawing below. （ and so on）
2. In the same way, attach four screws ⑤ and four nylon washers ⑥ on sensor (2) assy ④ .
3. Insert six sensor arm assys ② on the axes of stop rail bracket assy. (See Detail F)
4. Fasten sensor (1) assy ③ and sensor (2) assy ④ on sensor arm assys ② with six
screws ⑤ .
5. Tighten six screws ⑤ into the height adjust screw socket of stop rail bracket assy,
then fasten sensor (1) assy and sensor (2) assy. (See Detail F)
Position of screw and washer
Screw⑤
No. Description
1 Action Assy. (With Shutter)
2 Sensor Arm Assy
3 Sensor (1) Assy
4 Sensor (2) Assy
5 + BINDING MACHINE SCREW + Binding machine screw
6 Nylon Washer
– 49 –
Description Remarks
Action assy
Sensor arm assy
Sensor arm (1) assy
Sensor arm (2) assy
M3 x 6 Black
Nylon washer t=0.5 2.7- 7
PN
See J-3
916391
909106 [909041]
909343 [909149]
878804
916412
Without ［ ］= GM,GE,RX-1
With［ ］= RX-2,3,5