Ｃ】 D-Sub Box - Kawai ANYTIME X2 GP Service Manual

〔6〕 PARTS LIST & ASSEMBLING INSTRUCTIONS
【C】 D-sub Box
Assembling Instruction
1. Fasten SFPGA PWB assy ② on FPGA PWB cover assy ① with four screws ⑤ .
＊ Install assy in the direction shown in the drawing.
2. Insert sensor relay (1) into the hole of FPGA PWB cover assy ① , then fasten D-sub connector ③ and
D-sub spring ④ with two screws ⑤ .
3. Connect sensor relay (1) to the two connectors on the FPGA PWB.
4. Connect sensor relay (2) to one connector on the FPGA PWB, then fasten it with INSULOK tie.
All manuals and user guides at all-guides.com
INSULOK tie T-18R
＊ Face the bindig part
– 35 –
Wiring diagram
FPGA relay(2) cable
to this side
No. Description Description
1 FPGA PWB Cover Assy FPGA PWB cover assy
2 FPGA PWB Assy FPGA PWB assy
D-sub Socket D-sub socket
3
(SENSOR Relay (1) Cable) (Sensor relay (1) cable)
4 D-sub. Spring D-sub Spring
+ BINDING TAPTITE SCREW
5 + Binding taptite screw S tite M3 x 6
S TITE
Sensor relay(1) cable
Tighten together with ground terminal
Remarks PN
910121
KEP-267 (2) 238361
Sensor relay (1) cable 950669
D110277 950683
812255