Ｅ】 Stop Rail - Kawai ANYTIME X2 GP Service Manual

〔6〕 PARTS LIST & ASSEMBLING INSTRUCTIONS
【E】 Stop Rail
【E-1】 Shank Stop Rail (1)
4
5
3
6
7
6
All manuals and user guides at all-guides.com
1
2
2
Detail A
Align to the bend
Mating surfaces
Assembling Instruction
1. Attach two pieces of stop rail cushion (1) ② on shank stop rail (1) ① .
＊ Observe the attaching position shown in the drawing below.
2. Attach stop rail upper cushion (1) ③ and stop rail support plate (1) ④ on shank stop rail (1) ① .
＊ Observe the attaching position shown in the drawing below.
3. Insert four screws ⑤ and eight polyslider washers ⑥ into shank stop rail (1) ① .
4. Attach action scale sticker ⑦ on shank stop rail (1) ① .
＊ Observe the attaching position shown in Detail A.
Stop rail cushion (1) Attaching position
Stop rail cushion (1), Stop rail support plate (1) Attaching position
22
Detail A
No. Description
1 Shank Stop Rail (1) Shank stop rail (1)
2 Stop Rail Cushion (1) Stop rail cushion (1)
3 Stop Rail Upper Cushion (1) Stop rail upper cushion (1)
4 Stop Rail Board (1) Stop rail board (1)
+ BINDING WASHER DOUBLE + Binding washer double
5
SEMS MACHINE SCREW SEMS machine screw
6 Polyslider Washer Polyslider washer
7 Action Scale Sticker Action scale sticker
– 38 –
Align to the edge of R corner
22
Description Remarks
M3 x 6
t=0.8 2.85- 7
Without ［ ］= GM,GE,RX-1
With［ ］= RX-2,3,5
Mating surfaces
PN
917419 [915769]
917443 [915807]
917478 [915874]
917451 [915858]
442569
916382
915882