Table of Contents
Advertisement
1.1 Specifications
Voice Prompting
•
All prompts are in complete sentences using a
pleasant, easy to understand female voice
•
Panel status is constantly announced, when
applicable, including bypass, trouble, alarm
memory and zone status
Library
•
250+ system words
•
240+ words for programming labels
•
Powerful 'say number' command can announce
any number from 0 through 999 in three ways
Programmable Labels
•
System Zone Labels
•
Automation Item Labels
•
Mode Labels
•
Miscellaneous System Labels
•
System Partition Labels
•
Thermostat Labels
Automation Control
•
Requires the connection of the PL-513 or PSC04
X-10 controller module
•
Control up to 32 X-10 Automation Items
•
Full range of dimming for lighting control
•
Global ON/OFF command
Temperature Control
•
Available with the following control panels only:
PC5010 v2.x, PC5015 v2.x, PC5008 v2.x
•
Requires at least one EMS thermostat
•
Connect and control up to four thermostats
•
Each thermostat has four sets of temperature
ranges: Day Occupancy Setting, Night
Occupancy Setting, Auxiliary Occupancy
Setting, Away Occupancy Setting
•
Up to six EMS-ITS modules (indoor sensors)
can be connected to each thermostat for
temperature averaging
•
One EMS-OTS module (outdoor sensor) can
be connected to each thermostat to detect and
display the outdoor temperature
Note: Does not support heat pump applications.
System Introduction
S
E
C
T
firealarmresources.com
I
O
N
1
Additional Features
•
Manual control of Automation Items and temperature
•
16 schedules with ON Time, OFF Time and Day of
Week Mask
•
8 user-controlled modes
•
Event-activated control of Automation Items and
temperature for any PGM Output option supported
by the main control panel
Downloading
•
All VPM5580TC programming can be done via
DLS-1 v6.5 or higher software, through the
security control panel. Please refer to
Installation Manual for the security control panel
for details
1.2 About this Manual
In this manual, VPM5580TC voice messages are
printed in bold and are enclosed in quotes, as
shown here:
"Enter your access code"
"Enter y
"Enter y
our access code"
our access code"
our access code"
"Enter y
"Enter y
our access code"
You can program labels for the VPM5580TC to
announce when it refers to things such as zones
and partitions (e.g. "East wing" instead of "Partition
2"). Some sections give examples of programmed
labels. These examples are enclosed in brace
brackets, as shown here:
"Program the VPM5580TC to announce an
appropriate label, such as {Holiday Mode}
for mode 01. "
When instructed to press a key or keys, symbols for
the keys will be enclosed in square brackets, as
shown here:
4
Enter [ ]
Advertisement
Table of Contents
