Table of Contents
Advertisement
VPM5580TC Access Programming
4.1 Accessing the VPM5580TC
Locally
To access your security system from a Communiqué
telephone:
1. Press the [SECURITY] key. If you are using a
telephone connected to a Communiqué DAI
station, press [7][3] (Security Functions). The
system will announce "Hello"
2. If the Access Code Required for Security System
Access option is enabled the system will
announce "Enter Your Access Code"
"Enter Your Access Code"
"Enter Your Access Code"
"Enter Your Access Code" . . . . .
"Enter Your Access Code"
Access to the security system will not be granted
until a valid access code has been entered.
NOTE: Invalid access codes do count towards Main
Panel Keypad Lockout (see the "Keypad Lockout"
section of your system Installation Manual.)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Code Required for
Security Access ................... Section [021]: [02]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4.2 Accessing the VPM5580TC
Remotely
If the Remote Access option is enabled the security
system can be accessed remotely from any touch
tone phone in the world (requires a Message Center
Card to be installed on the Communiqué main
panel). To access your security system remotely:
1. Call your telephone number and wait for the
automated greeting.
2. During the greeting, press the [*] key along with
a remote access code if required and the system
will announce, "Enter a Feature Option"
"Enter a Feature Option"
"Enter a Feature Option"
"Enter a Feature Option".
"Enter a Feature Option"
3. Enter [7][3] for Security Functions and the
system will announce, "Hello. Enter your
access code or press [#] to return to
remote access options".
4. Enter a valid access code. If the code is not
entered within 10 seconds or if the incorrect
user code is entered 3 times, the system will
back the user up one step to the "Enter a
Feature Option"
Feature Option"
Feature Option"
Feature Option"
Feature Option" prompt.
If everything is done correctly the VPM5580TC
will begin to announce the status of the system.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Local and Remote Access ... Section [021]: [01]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
S
E
C
T
"Hello" . . . . .
"Hello"
"Hello"
"Hello"
"Enter a
"Enter a
"Enter a
"Enter a
firealarmresources.com
I
O
N
4.3 Global or Partition Operation
If you are connecting the VPM5580TC to a system
with 2 partitions, you can program the VPM5580TC
to allow access to both partitions (global operation),
or to only one partition.
Global Operation
If the security system has been set up with 2
partitions, enable the Access Code Required for
Security System Access option. Enabling this
option ensures that users can only access partitions
they have permission for.
When a user accesses the VPM5580TC, it will
automatically determine which partition(s) to select
from the access code entered. (E.g. if the access
code entered only works on partition 1, the
VPM5580TC will allow access to partition 1 and
begin to announce its status.)
If the access code entered has permission for both
partitions, the VPM5580TC will prompt:
"T
"T
"T
"To select {System}, press [1]."
"T
o select {System}, press [1]."
o select {System}, press [1]."
o select {System}, press [1]."
o select {System}, press [1]."
"T
"T
"T
"T
"To select {Partition 2}, press [2]."
o select {Partition 2}, press [2]."
o select {Partition 2}, press [2]."
o select {Partition 2}, press [2]."
o select {Partition 2}, press [2]."
Once the user presses [1] or [2], the VPM5580TC
will grant access to the selected partition and
begin to announce its status.
If the partition is in Ready mode, the VPM5580TC
will prompt either:
"T
"T
"To select {System}, press [#], then [1]."
"T
"T
o select {System}, press [#], then [1]."
o select {System}, press [#], then [1]."
o select {System}, press [#], then [1]."
o select {System}, press [#], then [1]."
"T
"T
o select {Partition 2}, press [#], then [2]."
o select {Partition 2}, press [#], then [2]."
"T
"T
"To select {Partition 2}, press [#], then [2]."
o select {Partition 2}, press [#], then [2]."
o select {Partition 2}, press [#], then [2]."
This allows the user to select the other partition if
their access code has permission for both partitions.
Partition Operation
If you need to prevent all users from having local
access to either of the partitions through the
VPM5580TC, disable VPM5580TC access to that
partition in section [002], options [01-02].
Do not disable access to both partitions.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Partition Access ............. Section [002]: [01-02]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
11
4
or
Advertisement
Table of Contents
